for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 94 linear & power amplifiers - smt hmc441lp3 / 441lp3e gaas phemt mmic medium power amplifier, 6.5 - 13.5 ghz v04.0508 general description features functional diagram the hmc441lp3 & hmc441lp3e are broadband gaas phemt mmic medium power ampli ers which operate between 6.5 and 13.5 ghz. the leadless plastic qfn surface mount packaged ampli er provides 14 db of gain, +20 dbm saturated power at 20% pae from a +5v supply voltage. an optional gate bias is provided to allow adjustment of gain, rf output power, and dc power dissipation. this 50 ohm matched ampli er does not require any external components making it an ideal linear gain block or driver for hmc smt mixers. gain: 14 db saturated power: +20 dbm @ 20% pae single supply voltage: +5v w/ optional gate bias 50 ohm matched input/output 16 lead 3x3mm smt package: 9mm 2 electrical speci cations, t a = +25 c, vdd = 5v, vgg1 = vgg2 = open typical applications parameter min. typ. max. min. typ. max. min. typ. max. units frequency range 6.5 - 8.0 8.0 - 11.0 11.0 - 13.5 ghz gain 10 13 12 14 10 13 db gain variation over temperature 0.02 0.025 0.02 0.025 0.02 0.025 db/ c input return loss 12 15 14 db output return loss 12 15 13 db output power for 1 db compression (p1db) 13 16 15 18 14 17 dbm saturated output power (psat) 18.5 20 19.5 dbm output third order intercept (ip3) 23 26 26 29 26 29 dbm noise figure 5.0 4.5 4.75 db supply current (idd) 90 115 90 115 90 115 ma vgg1, vgg2: optional gate bias the hmc441lp3 / hmc441lp3e is a medium pa for: ? point-to-point radios ? point-to-multi-point radios ? vsat ? lo driver for hmc mixers ? military ew & ecm
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 95 input return loss vs. temperature output return loss vs. temperature broadband gain & return loss gain vs. temperature p1db vs. temperature psat vs. temperature -25 -20 -15 -10 -5 0 5 10 15 20 45678910111213141516 s21 s11 s22 response (db) frequency (ghz) -25 -20 -15 -10 -5 0 67891011121314 +25 c +85 c -40 c return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 67891011121314 +25 c +85 c -40 c return loss (db) frequency (ghz) 4 8 12 16 20 24 67891011121314 +25 c +85 c -40 c psat (db) frequency (ghz) 4 8 12 16 20 24 67891011121314 +25 c +85 c -40 c p1db (db) frequency (ghz) 0 4 8 12 16 20 67891011121314 +25 c +85 c -40 c gain (db) frequency (ghz) hmc441lp3 / 441lp3e v04.0508 gaas phemt mmic medium power amplifier, 6.5 - 13.5 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 96 linear & power amplifiers - smt power compression @ 10 ghz output ip3 vs. temperature noise figure vs. temperature gain, power & output ip3 vs. supply voltage @ 10 ghz reverse isolation vs. temperature gain, power & idd vs. gate voltage @ 10 ghz 0 5 10 15 20 25 30 35 0 30 60 90 120 150 180 210 -2 -1.8 -1.6 -1.4 -1.2 -1 -0.8 -0.6 -0.4 -0.2 0 gain p1db psat idd gain (db), p1db (dbm), psat (dbm) idd (ma) vgg1, vgg2 gate volltage (v) 10 12 14 16 18 20 22 24 26 28 30 32 3 3.5 4 4.5 5 5.5 gain p1db psat ip3 gain (db), p1db (dbm), psat (dbm), ip3 (dbm) vdd supply voltage (v) -50 -40 -30 -20 -10 0 67891011121314 +25 c +85 c -40 c isolation (db) frequency (ghz) 0 2 4 6 8 10 67891011121314 +25 c +85 c -40 c noise figure (db) frequency (ghz) 16 20 24 28 32 36 67891011121314 +25 c +85 c -40 c ip3 (dbm) frequency (ghz) 0 2 4 6 8 10 12 14 16 18 20 22 -10 -6 -2 2 6 10 pout gain pae pout (dbm), gain (db), pae (%) input power (dbm) hmc441lp3 / 441lp3e v04.0508 gaas phemt mmic medium power amplifier, 6.5 - 13.5 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 97 outline drawing absolute maximum ratings drain bias voltage (vdd) +6 vdc gate bias voltage (vgg1,vgg2) -8 to 0 vdc rf input power (rfin)(vdd = +5 vdc) +15 dbm channel temperature 175 c continuous pdiss (t = 85 c) (derate 8.5 mw/c above 85 c) 0.76 w thermal resistance (channel to ground paddle) 118. 2 c/ w storage temperature -65 to +150 c operating temperature -40 to +85 c vdd (v) idd (ma) +5.5 92 +5.0 90 +4.5 88 +3.3 83 +3.0 82 note: ampli er will operate over full voltage range shown above typical supply current vs. vdd part number package body material lead finish msl rating package marking [3] hmc441lp3 low stress injection molded plastic sn/pb solder msl1 [1] 441 xxxx hmc441lp3e rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] 441 xxxx [1] max peak re ow temperature of 235 c [2] max peak re ow temperature of 260 c [3] 4-digit lot number xxxx package information notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. electrostatic sensitive device observe handling precautions hmc441lp3 / 441lp3e v04.0508 gaas phemt mmic medium power amplifier, 6.5 - 13.5 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com 11 11 - 98 linear & power amplifiers - smt pin descriptions pin number function description interface schematic 1, 3-5, 8-10, 12-14, 16 n/c this pin may be connected to rf/dc ground. 2rfin this pin is ac coupled and matched to 50 ohms. 6, 7 vgg1, vgg2 optional gate control for ampli er. if left open, the ampli er will run at standard current. negative voltage applied will reduce current. 11 rfout this pin is ac coupled and matched to 50 ohms. 15 vdd power supply voltage for the ampli er. an external bypass capacitor of 100 pf is required. gnd package bottom must be connected to rf/dc ground. hmc441lp3 / 441lp3e v04.0508 gaas phemt mmic medium power amplifier, 6.5 - 13.5 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com linear & power amplifiers - smt 11 11 - 99 evaluation pcb the circuit board used in the nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con- nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appropriate heat sink. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 106705 [1] item description j1 - j2 pcb mount sma connector j3 - j7 dc pin c1 4.7 f capacitor, tantalum c2 - c4 100 pf capacitor, 0402 pkg. u1 hmc441lp3 / hmc441lp3e ampli er pcb [2] 106639 evaluation pcb, 10 mils [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 hmc441lp3 / 441lp3e v04.0508 gaas phemt mmic medium power amplifier, 6.5 - 13.5 ghz
|
